1) Ok start off by pulling off the fan speed control, its a literal thing too it just pulls off
2)You'll be left looking at a screw, remove this screw like so: :D
3)Remove upper console, I did this by prying the edges with a knife, screwdriver would do just be careful not to stress the plastic. it will just lift off
4)Remove the aerial (the gold plug)
5)Slide the upper part of the console up and pull the lower bit out
6)Look to the bottom of this pic and the white clip there is four of these ease them out carefully
7)Lift out of the casing and ease the front face from the holder, again I used a knife, you can use what works best for you. and you will end up with something that looks like this
Except yours will be peachy coloured, ignition off pull out the peach bulbs they will click out and install your new bulbs, turn the ignition on to test and his should happen
Then repiece the jigsaw any queries comment me and I'll help the best I can
Steve
